ArmorOS
All manufacturers
Manufacturer

Hard Head Veterans

Sweetwater, TX

Hard Head VeteransATEGATE
Visit website
Veteran-owned. ATE Gen2/Gen3/Lite/Rifle helmets + Kevy Hard Hat. Consumer + LE channels.

Articles mentioning Hard Head Veterans

  • 18 USC § 931 — The Federal Body Armor Baseline, Explained

    18 USC § 931 is the federal floor. Convicted violent felons cannot possess body armor. Post-Sessions v. Dimaya (2018), the definition of "crime of violence" narrowed to § 16(a). Here's what that means for sellers and buyers.

  • ACH-GEN-II — The Military Helmet Spec LE Actually Cares About

    ACH-GEN-II is the US Army's performance specification for Advanced Combat Helmet and its derivatives. It covers fragmentation V50, 9mm V50, backface deformation, and retention — a tougher spec than NIJ 0106. This guide covers what it specifies and why LE agencies increasingly require it.

  • Aramid Fibers — Kevlar vs Twaron vs Heracron

    Para-aramid fibers founded modern body armor — DuPont's Kevlar (1971) and Teijin's Twaron led the market before UHMWPE emerged. This guide compares the four major para-aramid suppliers (DuPont, Teijin, Hyosung, Kolon) and where each is used today.

  • ASTM E3141 — The LE Shield Test Method

    ASTM E3141 defines how to test ballistic LE shields — shot placement, velocity measurement, acceptance criteria — the protocol that makes E3347 compliance a defensible certification. This guide covers the test structure and what distinguishes it from NIJ 0108.01's panel-centric methodology.

  • ASTM E3347 — The New LE Shield Performance Specification

    ASTM E3347 is the first US performance specification purpose-built for LE ballistic shields. It covers shield body, edges, viewports, fasteners, and weak points — going beyond NIJ 0108.01's panel-only scope. This guide covers what E3347 actually tests and why it's rapidly becoming a procurement requirement.

  • Ballistic Ceramics — Alumina vs Silicon Carbide vs Boron Carbide

    Hard armor plates use ceramic strike faces to fracture bullets before they reach the fiber catch layer. Three ceramic families dominate — alumina, silicon carbide, and boron carbide. This guide covers weight, cost, and performance tradeoffs and the suppliers behind each.

Ballistic helmets (2)

  • ATE Tactical
    NIJ 0106 · Level IIIA · hard_head_veterans::ATE Tactical::IIIA
    Mfr. attested
  • GATE Tactical
    NIJ 0106 · Level IIIA · hard_head_veterans::GATE Tactical::IIIA
    Mfr. attested